|1. Face Shield:||Steel Mesh Mounded with Excellent View|
|2. Knob :||Adjustable Rotary Knob|
|3. Sweatband:||Removable & Washable Fabric|
|5. Standard:||CE EN166:2002/ANSI Z87.1-2010/AS/NZS1337.1-2010|
1.) APPLICATION AND LIMITATION OF USE
This helmet is designed to provide limited head protection by reducing the force of small falling objects striking or penetrating the top of the shell. It was not designed to provide front, side, or rear impact or penetration protection, while it may protect against light bumps in these areas.
Avoid contact of these devices with electrical wires, very low temperatures (-20 ℃ or -30 ℃ and very high temperatures (+150℃)
2.) PRE-USE INSPECTION
Always do a visual inspection of the helmets immediately before use to ensure that it is in a serviceable condition and operates correctly. The helmet should have no sharp, burr, damaged, missing parts, cracks, nicks, or breaks. To ensure the safety of users, the device should be regularly periodic examinations per month by a competent person strictly in accordance with the manufacturer’s periodic examination procedure for continued efficiency and durability of the device.
The helmet can be expected to remain in service for 5 years or more when it is not damaged during use.
4.) CLEANING AND DISINFECTION
Clean the helmet with mild soap and lukewarm water. Do not use paints, solvents, chemicals, adhesives, gasoline or like substances on this helmet. The impact resistance and other protective properties of the helmet may be destroyed by such substances. The loss of these protective properties may not be apparent or readily detectable by the user. After each use, disinfection should be done, and the use of agents that are not known to be harmful to th
Store the helmet in a cool, dry, and clean place out of direct sunlight. Avoid areas where heat, moisture, light, oil, or their vapours, or other degrading elements may be present.